24/7 board-up, soot removal, and smoke odor control

Emergency Fire Damage Restoration in NEWBURY PARK

Emergency Fire Damage Restoration in NEWBURY PARK is a licensed, IICRC-certified service that stops secondary damage after a house or commercial fire. We board up, extract firefighting water, remove soot, and run air scrubbers the same day you call. Our urgent fire restoration in NEWBURY PARK team answers at 2 a.m. on a holiday because smoke residue etches glass and metal within 72 hours.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Professional Emergency Fire Damage Restoration in NEWBURY PARK
Careful work. Honest options.
About this service

What Emergency Fire Damage Restoration in NEWBURY PARK Involves

Emergency Fire Damage Restoration in NEWBURY PARK is the first 24 to 72 hours of work after a fire: securing the structure, stopping water damage from firefighting lines, and pulling soot out of the air and off every surface. A typical job starts with a thermal imaging camera walk-through to find hidden hot spots and moisture pockets inside wall cavities, then moves to negative air machines and HEPA vacuums to keep ash from spreading into clean rooms.

Newbury Park homes face a specific risk after any fire: dry Santa Ana winds in October and November push smoke into attic vents and HVAC returns, so odor lingers in walls long after the visible char is gone. That is why we treat every call as urgent fire restoration NEWBURY PARK homeowners can schedule the same night, not a next-week estimate. If you are searching for emergency fire damage restoration near me in NEWBURY PARK California at 3 a.m., our line is staffed and a crew is dispatched.

  • ✓ Stops Secondary Damage
  • ✓ Dries Firefighting Water
  • ✓ Documents the Claim
  • ✓ Removes Odor at the Source
What's included

What Emergency Fire Damage Restoration Includes

Every job starts with board-up and assessment and ends with a signed walkthrough. The inclusions below are standard on every fire job we run in Newbury Park; structural rebuild is scoped separately once the structure is dry and clean.

✓

Emergency Board-Up

Plywood, plastic sheeting, and duct tape over windows, doors, and roof penetrations. We tarp a compromised roof and secure the property before we leave the first visit, usually within two hours of arrival.

✓

Water Extraction

Truck-mount extraction of firefighting water, followed by Dri-Eaz and Phoenix Restoration Equipment dehumidifiers. We meter wall cavities with a moisture meter and dry until readings match an unaffected room.

✓

Soot and Ash Removal

HEPA vacuuming of ceilings, walls, and ductwork, plus dry-chemical sponge cleaning of hard surfaces. We use a pry bar and drywall saw only where cavities are saturated or charred.

✓

Odor Control

Hydroxyl generators in occupied spaces, ozone generators in vacant ones, and thermal fogging for wall cavities. Charcoal odor absorbers go in closets and cabinets, and we re-sniff before sign-off.

✓

Contents Cleaning

Furniture, clothing, and kitchenware that can be saved go to our cleaning room. Items that cannot are photographed and itemized for your claim before disposal.

✓

Insurance Documentation

Room-by-room photos, moisture logs, and a line-item scope with quantities. We walk the property with your adjuster if you want, which usually shortens the approval timeline.

How it works

Our Emergency Fire Restoration Process

01

Call and Dispatch

You call (833) 929-6186 and speak to a live dispatcher, not a voicemail. We collect the address, the fire department's incident number, and whether the structure is safe to enter. A crew is rolling within 60 minutes, and we text you the technician's name and ETA.

02

Secure and Assess

We arrive, walk the property with a thermal imaging camera, and board up windows, doors, and roof penetrations with plywood and plastic sheeting. If the roof structure is compromised, we tarp it. The assessment takes 45 to 90 minutes and produces a written scope you can hand to your adjuster.

03

Water and Soot Removal

We extract firefighting water with truck-mount units, then HEPA-vacuum ceilings, walls, and ductwork. Soot comes off with dry-chemical sponges and, where needed, a pry bar and drywall saw to open cavities that are saturated. This is the messiest day and usually the longest.

04

Dry, Deodorize, and Clean

Dehumidifiers and air scrubbers run 24/7 for three to five days. We set hydroxyl generators in occupied areas and ozone generators in vacant ones, then clean every hard surface with EPA-registered products. Contents that can be saved go to our cleaning room; the rest gets itemized for the claim.

05

Repair and Walkthrough

Once moisture readings are back to normal, we replace drywall, insulation, lumber, and roofing shingles as scoped. Final walkthrough is with you and, if you want, your adjuster. We do not close the job until you sign off on odor and cleanliness.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal imaging camera

Finds hidden hot spots and moisture pockets inside wall cavities before we open anything, so we demo only what needs to come out.

Moisture meter

Reads moisture content in drywall, lumber, and framing. We log readings daily and dry until they match an unaffected room.

Air scrubber and negative air machine

Keeps ash and soot particles from migrating into clean rooms. We run them 24/7 during the cleaning phase.

HEPA vacuum

Pulls fine ash out of ceilings, walls, and ductwork without blowing it back into the air.

Hydroxyl generator and ozone generator

Hydroxyl units treat occupied spaces safely; ozone units treat vacant ones. We choose based on whether you are staying in the home.

Dri-Eaz and Phoenix Restoration Equipment dehumidifiers

Dries firefighting water out of wall cavities and subfloor before mold can start, usually over three to five days.

Drywall saw, pry bar, and sledgehammer

Opens saturated or charred cavities for cleaning and drying. We cut only what the moisture meter and thermal camera tell us to cut.

Real results

Before and after.

Kitchen Fire in Dos Vientos

Before

A grease fire had left protein residue on every cabinet and a visible smoke line across the ceiling. The range hood and duct run were coated, and the smell returned every time the oven was turned on.

After

We degreased the cabinets, cleaned the hood and duct, and sealed the ceiling with a stain-blocking primer. Air scrubbers ran for three days. A re-sniff test on day four passed, and the kitchen was back in service in seven days.

Attic Fire in Casa Conejo

Before

A recessed light had smoldered in the attic insulation for hours before anyone noticed. The framing was charred in a 4-foot section, and the insulation was saturated with smoke residue.

After

We opened the cavity, removed the saturated insulation, and treated the framing with an odor neutralizer. Thermal imaging confirmed no hot spots. Moisture readings were back to normal in five days, and the bedroom below was back in service in a week.

Apartment Fire in Rancho Conejo

Before

A kitchen fire in one unit sent smoke through the shared attic and into three neighboring units. The shared HVAC was pulling smoke into units that never saw flame.

After

We assessed all three units, cleaned the shared HVAC, and treated each unit separately. Two units were back in service in four days, the fire unit in twelve. The property manager got a written scope for the owner and the insurer the same week.

Problems we solve

Problems We Solve After a Fire

The fire is out, but the damage keeps moving. These are the problems Newbury Park homeowners call us about most often, and how we stop them.

Ask a pro →
01

Smoke odor lingering in walls and HVAC

We clean the duct run, thermal-fog the cavities, and run hydroxyl generators for three to five days. Charcoal odor absorbers stay in closets until a re-sniff test passes, and we do not close the job until you confirm the smell is gone.

↗
02

Soot staining on walls and ceilings

Our technicians use dry-chemical sponges and HEPA vacuums to lift soot without spreading it. Where staining has set, we seal with a stain-blocking primer before repainting, so the yellow does not bleed through the finish coat.

↗
03

Water damage from firefighting efforts

We extract standing water on the first visit, set dehumidifiers, and meter wall cavities daily. If a cavity is saturated, we open it with a drywall saw, dry it, and replace the insulation before we close it back up.

↗
04

Insurance claim documentation challenges

We photograph every affected room, log moisture and temperature readings, and produce a line-item scope with quantities. Your adjuster gets a clean file, and we walk the property with them if you want.

↗
Proof you can check

Licensed, Certified, and Reviewed

✓
IICRC Certified FirmInstitute of Inspection, Cleaning and Restoration Certification
✓
IICRC FSRT (Fire and Smoke Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC OCT (Odor Control Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
California Contractors State License Board (CSLB) LicenseCalifornia Contractors State License Board
Good questions

Frequently Asked Questions

(833) 929-6186 →

We do. Our line at (833) 929-6186 is staffed by a live dispatcher 24 hours a day, 365 days a year, and we dispatch a crew within 60 minutes anywhere in Newbury Park. We handle board-up, water extraction, soot removal, and odor control on the first visit, so you are not waiting until Monday for a callback.

A crew is on-site within 60 minutes of your call for addresses in Newbury Park, and typically 75 to 90 minutes for Camarillo Springs or North Ranch. We text the technician's name and ETA within 15 minutes. If the fire department is still on scene, we stage nearby and coordinate with the incident commander.

Typical 2026 pricing runs $3,500 to $12,000 for a single-room fire and $18,000 to $60,000 or more for a whole-house job, depending on square footage, soot spread, and water damage. Most homeowner policies cover the work minus your deductible. We provide a written scope before work begins so you know the number.

Stay out of the structure, do not run the HVAC system, and do not wipe soot with a wet rag, which smears it deeper into drywall. If the power is off, empty the refrigerator and prop the door open. Keep pets and kids away from charred debris. Call us at (833) 929-6186 and we will walk you through the next step.

Ready when you are

Call for Emergency Fire Damage Restoration in NEWBURY PARK

A live dispatcher answers 24/7, and a crew is on-site within 60 minutes. We are IICRC-certified, CSLB-licensed, and we document the job the way your adjuster needs to see it. Call (833) 929-6186 now.

Call Now (833) 929-6186 →
Request an appointment

Contact our NEWBURY PARK crew

Call (833) 929-6186 any time, day or night. A live person answers, and we dispatch from Newbury Park. If you prefer email, send photos and your address to info@firedamagerestorationnewburypark.com and we will call you back within the hour during business hours. For emergencies, always call.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186