Soot, smoke, and charred wiring removed by an IICRC-certified crew.

Electrical Fire Cleanup in NEWBURY PARK, California

Electrical Fire Cleanup in NEWBURY PARK, California starts the moment you call. We pull charred drywall, HEPA-vac the soot, scrub the smoke out of the framing, and get the air safe to breathe again. Whether a breaker panel cooked off in a Dos Vientos garage or a knob-and-tube splice failed in a Casa Conejo attic, our crew handles the mess and the paperwork. We have been doing this work since 2022.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire Damage Restoration Newbury Park — your local Fire Damage Restoration team
Careful work. Honest options.
About this service

What Electrical Fire Cleanup in NEWBURY PARK, California Involves

Electrical Fire Cleanup in NEWBURY PARK, California is the specialized removal of soot, char, smoke residue, and compromised wiring left behind after an electrical fire, plus the drying and deodorizing that follows. It is not the same as a general house cleaning. Electrical fires burn hot and fast, and they leave behind a fine, acidic soot that etches metal, stains drywall, and eats into copper wiring. We start with a thermal imaging camera to find hidden hot spots, then work outward from the panel or outlet that failed.

Most of the electrical fire cleanup calls we run in Newbury Park come from three sources: aging aluminum branch wiring in 1960s and 1970s tract homes, overloaded panels in older Rancho Conejo properties, and failed outlet pigtails behind kitchen appliances. If you are searching for electrical fire cleanup near me in NEWBURY PARK California at 2 a.m., we answer. Our 24/7 electrical fire damage restoration NEWBURY PARK team rolls with air scrubbers, HEPA vacuums, and moisture meters already loaded.

  • ✓ Soot Removed at the Source
  • ✓ Smoke Odor Neutralized, Not Masked
  • ✓ Wiring and Panel Safety Check
  • ✓ Insurance Documentation Done Right
What's included

What Electrical Fire Cleanup Includes

Our standard electrical fire cleanup scope covers the structure: soot removal, char demolition, deodorization, and documentation. Wiring repair and panel replacement are done by a licensed electrician, and we coordinate that handoff so nothing stalls. Here is what is in the standard scope.

✓

Thermal Imaging Inspection

Before any demolition, we scan the affected area with a thermal imaging camera to find hidden hot spots and heat-damaged framing. This step catches problems that visual inspection misses and prevents a second fire after the cleanup is done.

✓

Char and Soot Removal

Crews pull charred drywall with a drywall saw and pry bar, bag it, and haul it out. HEPA vacuums lift loose soot from framing and insulation, and chemical sponges handle walls and ceilings. A typical single-room job takes 6 to 10 hours of active cleaning.

✓

Deodorization and Air Scrubbing

Air scrubbers and negative air machines run during demolition to keep particles out of the rest of the house. After the heavy soot is out, hydroxyl generators run for 24 to 72 hours. Charcoal odor absorbers go in closets and cabinets where smoke settles.

✓

Moisture Mapping and Drying

Firefighting water soaks into framing and subfloor. We map moisture with a moisture meter and set Dri-Eaz or Phoenix Restoration Equipment air movers and dehumidifiers until readings return to normal. Skipping this step is how mold starts two weeks later.

✓

Insurance Documentation Package

Every job ends with a photo report, moisture log, and itemized scope formatted for adjuster review. We stay available for follow-up questions from your insurance company for as long as the claim is open.

How it works

What to Expect During Electrical Fire Cleanup

01

Emergency Response

We take your call 24/7 and dispatch a crew, usually within 60 to 90 minutes for Newbury Park addresses. The first tech on site confirms the power is off, checks for hidden hot spots with a thermal imaging camera, and boards up any opening that lets weather or animals in.

02

Assessment and Scope

Within the first two hours we map the damage: soot travel, smoke penetration into HVAC, moisture from firefighting water, and any structural char. You get a written scope with photos before we start demolition. No surprise line items later.

03

Soot and Char Removal

Crews pull charred drywall with a drywall saw and pry bar, bag it, and haul it out. HEPA vacuums lift loose soot from framing and insulation. Chemical sponges handle the walls and ceilings. A 1,200-square-foot home with moderate soot typically takes two to three days of cleaning.

04

Deodorization and Air Quality

Air scrubbers and negative air machines run continuously during demolition. Once the heavy soot is out, we set hydroxyl generators for 24 to 72 hours depending on how far smoke traveled. Ductwork gets cleaned separately if the HVAC was running during the fire.

05

Final Walkthrough and Report

We walk the property with you, room by room, and hand over a photo report, moisture log, and itemized scope. That packet is what your adjuster needs. We stay available for follow-up questions from your insurance company for as long as the claim is open.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds hidden hot spots and heat-damaged framing before demolition starts. Catches problems visual inspection misses.

HEPA Vacuum

Lifts fine soot from framing, insulation, and surfaces without pushing particles back into the air.

Air Scrubber and Negative Air Machine

Keeps soot particles contained to the work area during demolition and filters the air in the rest of the house.

Hydroxyl Generator and Ozone Generator

Neutralizes smoke odor at the molecular level. Ozone runs in unoccupied spaces only; hydroxyl runs safely with occupants present.

Moisture Meter

Maps firefighting water in framing and subfloor so drying equipment is placed where it is actually needed.

Dri-Eaz and Phoenix Restoration Equipment Air Movers

Dries wet framing and subfloor alongside the soot cleanup so mold does not start behind the walls.

Drywall Saw, Pry Bar, and Sledgehammer

Removes charred drywall and lumber cleanly so the rebuild starts from sound material.

Real results

Before and after.

Garage Panel Fire in Dos Vientos

Before

A 200-amp panel in a Dos Vientos garage arced and scorched the surrounding drywall. Smoke traveled through the garage-to-house door and stained the laundry room ceiling. The homeowner had already tried wiping the soot and made it worse.

After

We pulled 32 square feet of charred drywall, HEPA-vacuumed the framing, and sealed it with stain-blocking primer. Hydroxyl generators ran for 48 hours. The laundry room ceiling was cleaned and repainted. The job took four days from call to final walkthrough.

Bedroom Outlet Fire in Casa Conejo

Before

An outlet in a 1968 Casa Conejo bedroom failed and scorched the wall cavity. The smoke smell had soaked into the closet and the carpet. The homeowner was ready to replace the carpet and repaint the whole room.

After

We removed the charred drywall, cleaned the cavity, and ran air scrubbers for 36 hours. The carpet was saved with HEPA vacuuming and a hydroxyl treatment. Only the affected wall needed paint. Total job time was three days.

Attic Wiring Fire in Rancho Conejo

Before

Attic wiring overheated and scorched the roof sheathing in a Rancho Conejo home. The smoke settled into the attic insulation and started showing up as a smell in the upstairs bedrooms whenever the heater ran.

After

We removed 120 square feet of smoke-damaged insulation, HEPA-vacuumed the roof cavity, and cleaned the HVAC ductwork. Air scrubbers ran for 72 hours. Moisture readings confirmed the sheathing was dry before we closed the attic up.

Problems we solve

Electrical Fire Problems We Solve in Newbury Park

Electrical fires leave a specific set of problems that general cleaning crews are not equipped to handle. These are the ones we see most often in Newbury Park homes and how we address them.

Ask a pro →
01

Smoke odor lingering in walls and HVAC

We clean the ductwork separately when the HVAC was running during the fire, then run hydroxyl generators for 24 to 72 hours. Charcoal odor absorbers go in closets and cabinets. The odor is neutralized at the source, not masked.

↗
02

Soot staining on walls and ceilings

We lift soot with HEPA vacuums and chemical sponges, then seal the framing with a stain-blocking primer before any new paint goes on. That is the step most crews skip, and it is why stains come back.

↗
03

Melted wiring and electrical hazards

We do not re-energize anything until a licensed electrician inspects it. Every circuit with visible char or heat discoloration gets flagged in the report, and that report goes to both your adjuster and your electrician.

↗
04

Water damage from firefighting efforts

We map moisture with a moisture meter and run air movers and dehumidifiers until readings return to normal. Drying runs alongside the soot cleanup, not after it, so the structure does not sit wet for days.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC Certified FirmInstitute of Inspection, Cleaning and Restoration Certification
✓
IICRC FSRT (Fire and Smoke Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC OCT (Odor Control Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
California Contractors State License Board (CSLB) LicenseCalifornia Contractors State License Board
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most single-room electrical fire cleanup jobs in Newbury Park run $2,800 to $8,500 in 2026, and whole-house jobs with attic or panel damage can exceed $20,000. The biggest cost drivers are how far soot traveled, whether HVAC ductwork needs cleaning, and how much drywall has to come out. We give you a written scope before demolition starts so there are no surprise line items.

We do. Fire Damage Restoration Newbury Park handles electrical fire damage restoration in NEWBURY PARK and the surrounding Conejo Valley, with crews dispatched 24/7. Our technicians are IICRC FSRT and OCT certified, and we work directly with insurance adjusters. Call (833) 929-6186 and we will have a tech on site, usually within 60 to 90 minutes.

Sometimes, but only after inspection. Copper that was exposed to heat above roughly 200 degrees Fahrenheit may look fine and still have compromised insulation. Any wiring with visible char, melted insulation, or heat discoloration gets replaced. A licensed electrician makes the final call, and we document every circuit we flag so the decision is on paper.

Yes, in most cases. A standard homeowners policy covers fire damage including electrical fires, along with the water damage from firefighting. What gets denied is usually poor documentation, not the loss itself. We photograph every affected surface, log moisture readings, and itemize contents so your adjuster has what they need to approve the claim.

Ready when you are

Call for Electrical Fire Cleanup in NEWBURY PARK, California

We answer the phone 24/7, dispatch a certified crew within 60 to 90 minutes, and give you a written scope before demolition starts. One call handles the cleanup, the deodorization, and the insurance documentation.

Call Now (833) 929-6186 →
Request an appointment

Contact our NEWBURY PARK crew

Call (833) 929-6186 any time, day or night. A live person answers, and we dispatch from Newbury Park. If you prefer email, send photos and your address to info@firedamagerestorationnewburypark.com and we will call you back within the hour during business hours. For emergencies, always call.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186