Board-up, soot removal, and smoke odor control that gets your doors open again.

Commercial Fire Restoration in NEWBURY PARK, California

Commercial Fire Restoration in NEWBURY PARK, California starts with a crew on-site fast, not a call center reading a script. We handle business fire damage restoration in NEWBURY PARK for retail floors, offices, restaurants, and warehouses, from emergency board-up and soot removal through structural repair and final air quality clearance. One team, one scope, one point of contact for your insurance adjuster.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire Damage Restoration Newbury Park serving NEWBURY PARK, California
Careful work. Honest options.
About this service

What Commercial Fire Restoration in NEWBURY PARK, California Involves

Commercial Fire Restoration in NEWBURY PARK, California is the licensed trade of stabilizing a fire-damaged commercial building, removing soot and smoke residue, drying water left by firefighting, and rebuilding the structure so the space can legally reopen. It is not a cleaning job. Soot etches metal fixtures within hours, smoke pushes through HVAC ducts into untouched rooms, and charred framing loses load capacity long before it looks dangerous. We scope the whole building, not just the burned room.

Local businesses here run into the same pattern: a kitchen suppression discharge at a Reino Road restaurant, an electrical fire in a Wendy Drive office suite, or a roof fire that leaves 40,000 square feet of inventory smelling like a campfire. Smoke odor lingering in walls and HVAC is the complaint we hear most, and it is the one that kills a reopening date. We test with a moisture meter and thermal imaging camera before anyone swings a sledgehammer.

  • ✓ Faster Reopening Dates
  • ✓ Insurance Documentation Done Right
  • ✓ Odor That Stays Gone
  • ✓ Code-Correct Rebuild
What's included

What Our Commercial Fire Restoration Covers

Our commercial fire restoration scope runs from the first emergency call through the final walkthrough. Emergency response, soot and smoke removal, drying, odor control, and structural repair are all included in the standard scope. Contents cleaning and specialty restoration are quoted separately once we see the load.

✓

Emergency Board-Up and Tarping

Securing openings, tarping a compromised roof structure, and shutting off compromised utilities. This happens in the first hours, before weather or theft adds a second loss to the first one.

✓

Soot and Smoke Residue Removal

HEPA vacuum and dry sponge work first, then wet cleaning on bonded residue. We pull ceiling tiles, insulation, and any porous material that smoke soaked into rather than trying to clean it in place.

✓

Water Extraction and Structural Drying

Firefighting water hides in drywall, insulation, and subfloor. We extract, then dry to standard with moisture meter readings logged daily, so mold growth after fire and water damage never gets started.

✓

Odor Control and Air Quality

Hydroxyl generator and ozone generator cycles sized to the building, plus air scrubber and negative air machine placement during the work. Charcoal odor absorbers stay in hard-to-reach cavities until the final walkthrough.

✓

Structural Repair and Rebuild

Charred structural framing, compromised roof structure, and melted wiring repaired to California code under a CSLB-licensed contractor. Drywall, insulation, lumber, plywood, roofing shingles, paint and primer, and caulk and sealant all go in on one schedule.

✓

Insurance Claim Documentation

Timestamped photos, thermal imaging camera readings, moisture logs, and a line-item scope packaged for your adjuster. This is the part that decides whether your claim pays for the whole job or a negotiated fraction of it.

How it works

How Our Commercial Fire Restoration Process Runs

01

Emergency Response

We take your call 24/7 and roll a crew to the Newbury Park address with board-up materials, plastic sheeting, and air scrubbers. First hour is about stopping further damage: securing openings, shutting off compromised utilities, and tarping a compromised roof structure before weather gets in.

02

Assessment and Scope

A IICRC FSRT-certified technician walks the building with a thermal imaging camera and moisture meter, mapping soot staining on walls and ceilings, water damage from firefighting efforts, and hidden smoke travel through ductwork. You get a written scope and photo set within 24 to 48 hours.

03

Soot and Smoke Removal

Dry soot comes off first with HEPA vacuum and dry sponges, then wet cleaning on the surfaces that need it. We pull ceiling tiles and insulation where residue has soaked in, and we set negative air machines to keep contaminants from spreading into clean zones while we work.

04

Drying and Odor Control

Firefighting water hides in drywall, insulation, and subfloor. We dry the structure to standard before any rebuild starts, then run hydroxyl generator and ozone generator cycles sized to the cubic footage. Charcoal odor absorbers stay in place until the final walkthrough confirms the air is clean.

05

Rebuild and Clearance

New drywall, insulation, lumber, plywood, roofing shingles, paint and primer, and caulk and sealant go in under a CSLB-licensed contractor. We test wiring, verify HVAC cleanliness, and walk the space with you before handover. Most commercial rebuilds run 2 to 6 weeks depending on scope.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds hidden heat damage in framing and traces smoke travel through wall cavities and ductwork that looks clean from the outside.

Moisture Meter

Logs water content in drywall, insulation, and subfloor so we know when the structure is actually dry and rebuild can start.

Air Scrubber and Negative Air Machine

Keeps soot and smoke particles out of clean zones during the work and maintains pressure so contaminants do not migrate through the building.

Hydroxyl Generator and Ozone Generator

Neutralizes smoke odor at the molecular level. Hydroxyl units run in occupied-adjacent spaces; ozone cycles run in sealed, unoccupied areas only.

HEPA Vacuum

Pulls dry soot off surfaces and out of crevices without pushing fine particles back into the air.

Drywall Saw, Pry Bar, Sledgehammer

Opens walls and ceilings to reach smoke-soaked insulation and charred framing, and removes material that cannot be cleaned.

Charcoal Odor Absorbers

Sits in wall cavities, ceiling plenums, and closed spaces after equipment comes out, catching residual odor before it reaches the customer.

Real results

Before and after.

Reino Road Restaurant Kitchen Fire

Before

A suppression line discharged overnight, coating the kitchen line, hood, and dining room in chemical residue and smoke. Water sat in the subfloor for six hours before anyone called. The owner had a Friday dinner service booked and no plan.

After

We extracted the water, dried the subfloor to standard in three days, cleaned the suppression residue and ductwork, and ran hydroxyl cycles through the dining room. The kitchen rebuild took eleven days. Limited menu service resumed on day nine, full service on day fourteen.

Rancho Conejo Two-Suite Office Fire

Before

An overnight electrical fire damaged two suites and pushed smoke through the shared HVAC into a third. The building had tenants in the unaffected wing who needed to keep working. The landlord had two carriers involved and no documented scope.

After

We boarded up, isolated the burned suites under negative pressure, cleaned the shared ductwork, and rebuilt both suites to California code. Thermal imaging confirmed the smoke had not reached the fourth suite. Both suites were back in service in thirty-one days.

Ventu Park Warehouse Roof Fire

Before

A roof fire left roughly 30,000 square feet of stored inventory smoke-damaged. The operator assumed the whole load was a write-off and was ready to file a total loss on the contents. The roof deck was compromised over about 4,000 square feet.

After

We separated cleanable from unsalvageable inventory and documented every pallet. Hydroxyl cycles ran through the racking for six days. The roof deck and shingles were rebuilt over 4,000 square feet. Most of the inventory was salvaged and the building passed the air quality walkthrough first try.

Problems we solve

Problems We Solve for Newbury Park Businesses

Most of the damage after a commercial fire is not the char. It is the smoke, the water, and the paperwork. Here is what we actually get called to fix.

Ask a pro →
01

Smoke odor lingering in walls and HVAC

We trace smoke travel through ductwork with a thermal imaging camera, clean the HVAC components, and run hydroxyl generator cycles sized to the cubic footage. Charcoal odor absorbers go into wall cavities and ceiling plenums. We verify the air before we pull equipment.

↗
02

Soot staining on walls and ceilings

Dry soot comes off first with HEPA vacuum and dry sponges, before any wet cleaning touches it. Wet cleaning follows on bonded residue, and we seal surfaces that need it before primer goes on. Timing matters more than technique here.

↗
03

Water damage from firefighting efforts

We extract standing water the first night and start structural drying immediately. Moisture meter readings get logged daily until the structure hits dry standard. No rebuild starts until the framing is dry.

↗
04

Insurance claim documentation challenges

Our files include timestamped photos of every affected surface, thermal readings, moisture logs, and a line-item scope. We hand your carrier a documented package and stay available for the adjuster's questions.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC Certified FirmInstitute of Inspection, Cleaning and Restoration Certification
✓
IICRC FSRT (Fire and Smoke Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC OCT (Odor Control Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
California Contractors State License Board (CSLB) LicenseCalifornia Contractors State License Board
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most commercial fire restoration jobs in Newbury Park run $8,000 to $75,000 in 2026, with small office suites near the low end and multi-tenant retail or restaurant losses well above it. Cost drivers are square footage affected, how far smoke traveled through HVAC, whether the roof structure needs repair, and how much firefighting water soaked into drywall and insulation. Emergency board-up alone typically runs $1,500 to $4,500.

We do, and we handle the whole scope in-house: emergency response, soot removal, smoke odor control, drying, and structural repair. Call (833) 929-6186 and you reach our team directly, not a national dispatch line. We serve Newbury Park Downtown, Dos Vientos, Rancho Conejo, Ventu Park, and the surrounding Conejo Valley commercial corridors.

Plan on 2 to 6 weeks for most commercial scopes, with emergency stabilization done in the first 24 to 48 hours. A single burned office suite with light smoke travel can clear in about two weeks. A restaurant with suppression discharge, duct contamination, and a kitchen rebuild runs closer to six. We give you a written day-by-day schedule after the assessment walkthrough.

Often yes, on a phased plan. We set negative air machines and plastic sheeting to seal off the work zone, so the undamaged side of your building can keep operating while restoration runs. Retail floors, offices, and warehouses with a separated fire room are the best candidates. If the fire hit your HVAC or electrical service, partial closure is usually the safer call, and we will tell you straight.

Ready when you are

Get Commercial Fire Restoration in NEWBURY PARK, California Started

One call gets a crew moving toward your building. We are IICRC Certified Firm credentialed, CSLB-licensed, and on call 24/7 for Newbury Park commercial losses. Call (833) 929-6186 and we will confirm your ETA and the first steps on the phone.

Call (833) 929-6186 (833) 929-6186 →
Request an appointment

Contact our NEWBURY PARK crew

Call (833) 929-6186 any time, day or night. A live person answers, and we dispatch from Newbury Park. If you prefer email, send photos and your address to info@firedamagerestorationnewburypark.com and we will call you back within the hour during business hours. For emergencies, always call.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186