Smoke odor lingering in walls and HVAC
We run hydroxyl generators and air scrubbers, seal exposed lumber with primer, and clean the HVAC returns. Most homes test neutral within 3 to 5 days.
Attic Fire Restoration in NEWBURY PARK, California starts with a full inspection and ends with a certified clear-out. We handle charred framing, smoke-soaked insulation, and the water left behind by firefighting, then document every step for your insurer. If you need attic fire damage repair NEWBURY PARK residents can count on, our crew is on call 24/7.

Attic Fire Restoration in NEWBURY PARK, California is the full cleanup and rebuild of an attic after a fire, covering soot removal, smoke odor control, structural repair, and air quality testing. Attics are tight, vented spaces, so heat and smoke travel fast through rafters and insulation. We map the burn path with a thermal imaging camera, pull wet or charred material, and treat the whole cavity, not just the visible scorch marks.
Most attic fires in this area start at a wiring junction, a recessed light, or a dryer vent run. By the time you smell smoke, soot has already settled into the insulation and HVAC returns. That is why we treat attic fire cleanup and restoration NEWBURY PARK California jobs as air-quality jobs first. If you search attic fire restoration near me in NEWBURY PARK California after a scare, call us before you run the furnace again.
Our standard scope covers the attic cavity and the rooms directly below. We tell you upfront what is part of the job and what would be an add-on, such as full roof replacement or contents pack-out.
A thermal imaging camera and moisture meter map the burn path and hidden water. We photograph each finding so you and your adjuster see the same evidence.
HEPA vacuuming, hand-scrubbing, and bagged removal of charred insulation, drywall, and lumber. We clear the cavity so rebuild can start on a clean surface.
Air movers and dehumidifiers pull firefighting water from framing and decking. We recheck moisture every 24 hours until readings match dry standard.
Hydroxyl generators and air scrubbers run until smoke odor in walls and HVAC is neutralized. We seal exposed lumber with primer to lock in residual smell.
Sistered rafters, new sheathing, insulation, drywall, and shingles. We rebuild the affected section to code and match existing finishes where possible.
A last air quality check confirms the attic is safe before we hand back the space. You get a written summary and a walkthrough of the finished work.
We arrive, secure the roof and attic openings with plastic sheeting and plywood, and shut off power to damaged circuits. This usually takes 1 to 2 hours. You get a first walkthrough and a clear picture of what happens next.
We scan the attic with a thermal imaging camera, take moisture meter readings, and test air quality. Charred framing, melted wiring, and soaked insulation all get logged. You receive an itemized scope and photo set within 24 hours.
Crews HEPA-vacuum the rafters and decking, then hand-scrub soot staining off walls and ceilings. We bag and remove charred insulation, drywall, and lumber. A 1,200-square-foot attic typically takes 2 to 3 days to clear.
Air scrubbers and hydroxyl generators run continuously while dehumidifiers pull moisture from the framing. We recheck with the moisture meter every 24 hours. Smoke odor in walls and HVAC is treated at the source, not masked.
We replace insulation, drywall, and shingles, then paint and seal. The last step is a final air quality check and a walkthrough with you. Most rebuilds finish 7 to 14 days after the dry-out clears.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Finds hidden hot spots and moisture behind drywall and insulation before we open anything up.
Tracks drying progress in framing and decking so we know when the cavity is actually dry.
Captures fine soot and smoke particles during demolition and cleanup, keeping the rest of the house clean.
Neutralizes smoke odor in the attic cavity and HVAC without leaving a chemical smell behind.
Creates pressure control so soot and dust do not migrate from the attic into living spaces.
Opens walls and ceilings cleanly to reach charred framing and soaked insulation.
Pulls moisture from framing after firefighting water soaks the cavity.
A junction box arced and scorched two rafters and about 40 square feet of decking. Soot covered the insulation, and the smell reached the bedrooms below.
We replaced the charred section, re-insulated, and ran hydroxyl treatment for 72 hours. Air test came back clean, and the homeowner was back in the rooms in 9 days.
Lint caught fire and spread into the attic cavity of a 1975 home. About 60 square feet of sheathing was charred, and firefighting water soaked the insulation below.
Crews cleared the char, dried the cavity over 4 days, and replaced sheathing and insulation. The insurer approved the scope in one pass, and rebuild finished in 11 days.
A strike started a small fire in the roof framing. The attic was open to the sky, and rain was forecast within 48 hours.
We boarded the roof the same night, dried the framing, and rebuilt the damaged rafter section. Final air test passed, and the roof held through the next storm.
Attic fires leave behind more than char. Here are the problems we see most often in Newbury Park and how we handle them.
Ask a pro →We run hydroxyl generators and air scrubbers, seal exposed lumber with primer, and clean the HVAC returns. Most homes test neutral within 3 to 5 days.
We extract standing water, set air movers and dehumidifiers, and check moisture meter readings daily until the cavity is dry.
We shut off affected circuits, remove melted wiring, and document the cause for your claim before any rebuild begins.
We sister or replace damaged framing, install new sheathing, and re-shingle the section so the roof holds its rating.
Most attic fire restoration jobs in Newbury Park run $3,500 to $18,000 in 2026, depending on square footage and how far the fire spread. Small wiring fires with limited soot often land near the low end. Jobs that need new sheathing, insulation, and shingles push toward the top. We give you a written scope before work starts, and we document everything for your insurer.
We do. Our crew handles attic fire damage repair in Newbury Park, from soot removal and odor control to framing and shingle replacement. We are licensed in California, IICRC certified, and on call 24/7. Call (833) 929-6186 and we can usually be at your door the same day.
Yes, in many cases. If the fire stayed below the decking and the shingles are intact, we clean, seal, and re-insulate without a full tear-off. Once charring reaches rafters or sheathing, that section gets replaced. A thermal scan and moisture meter readings tell us which path applies, usually within the first visit.
Most homeowner policies cover attic fire damage repair in Newbury Park, including cleanup, dry-out, and rebuild, up to your dwelling limit. We photograph every stage and provide an itemized scope your adjuster can process. We do not negotiate your policy for you, but we make sure the documentation is complete so the claim moves.
Smoke odor and charred framing get worse with every day you wait. Call our 24/7 line and we will inspect, scope, and start cleanup. Licensed, insured, and IICRC certified. One call gets a crew on the way.
Call Now (833) 929-6186 →Call (833) 929-6186 any time, day or night. A live person answers, and we dispatch from Newbury Park. If you prefer email, send photos and your address to info@firedamagerestorationnewburypark.com and we will call you back within the hour during business hours. For emergencies, always call.